A FAST AND EASY WAY TO MARK GLASS, METAL,
PLASTIC AND MANY OTHER MATERIALS
The 5159
is a Stationary Floor Model. It will mark an area of 2-1/4"
diameter. Excellent for marking plate glass and other material.
PRINCIPLE OF OPERATION
Part to be
marked is held firmly on rubber mask which is mounted to cut out
stencil plate. A blast of grit through mask produces etched mark
on surface of part. Time of blast and air pressure are controlled
by setting timer and air regulating valve. Grit is then returned
to hopper for reuse.
MASKS
The etching
masks are molded from different types of rubber; synthetic or
natural. The masks are relieved with stencil style characters,
special designs or trademarks which are reproduced with amazing
clarity. The durability and quality provides long life. Cost per
mark is extremely low. The mark is not limited to flat surfaces.
Tubular, convex or concave shapes can be marked with the use of a
nesting feature.
SPECIFICATIONS
|
Overall Dimensions:
|
Area 18"
Sq. x 33" High |
|
Air
Pressure Requirement:
|
1/2" Air
Lines, 15-100 P.S.I. |
|
Back-Up Pressure:
|
80-100
P.S.I. |
|
Electric Requirement:
|
110 V.
Single Phase |
|
Timer:
|
Regulated
within Seconds |
|
Grit
Capacity:
|
1-1/2 Lbs.
|
|
Marking Speed:
|
Depends on
area covered and depth of mark |
|
Marking Area:
|
is 5-1/2"
in Diameter |
Timer Optional on
all models
