A FAST AND EASY WAY TO MARK GLASS, METAL,
PLASTIC AND MANY OTHER MATERIALS
The 603C is
perfect for production line operations. This model was designed
for use in areas where the marking gun must be movable to the job.
It is ideal for marking large sheets of glass. Gun can be table
mounted for stationary operation without a gun handle and operated
by a foot switch.
PRINCIPLE OF OPERATION
Part to be
marked is held firmly on rubber mask which is mounted to cut out
stencil plate. A blast of grit through mask produces etched mark
on surface of part. Time of blast and air pressure are controlled
by setting timer and air regulating valve. Grit is then returned
to hopper for reuse.
MASKS
The etching
masks are molded from different types of rubber; synthetic or
natural. The masks are relieved with stencil style characters,
special designs or trademarks which are reproduced with amazing
clarity. The durability and quality provides long life. Cost per
mark is extremely low. The mark is not limited to flat surfaces.
Tubular, convex or concave shapes can be marked with the use of a
nesting feature.
SPECIFICATIONS
|
Overall Dimensions:
|
25" x 20" x
20" |
|
Marking Area of Movable Gun:
|
1-1/2" T/B
- 3-1/2" L/R |
|
Marking Area of Stationary Gun:
|
1-1/2" T/B
- 2" L/R |
|
Back-Up Pressure in
Air Line Required:
|
1/2" Air
Lines, 80-90 P.S.I. |
|
Machine Operative Air Pressure:
|
25 - 65
P.S.I. |
|
Electric Requirement
|
110 V.
Single Phase |
|
Timer:
|
Regulated
within Seconds |
|
Marking Speed:
|
Depends on
depth of mark |
|
Grit
Capacity :
|
1-1/2 Lbs.
|
|
Kit Contents
|
- M603C
-
Handgun with 9’ Hose
-
Electrical Box
-
Footswitch (if footswitch activated)
-
Pressure Regulator & Gauge
- Stencil Plate
- Aluminum Oxide Grit #180
- Safety Equipment
-
Instruction Booklet
|
Optional Items
|
|
